Effect of Heat Treatment on the Properties of Welded Joints of High-Strength Railway Rails
Main Article Content
Abstract
The objective of this paper is to investigate the effect of heat treatment using currents with 2.4 kHz frequency on the structure and hardness of the metal in welded joints of P65 type railway rails made of K76F, UIC60 steel made of R900A steel, and P65 made of R350HT steel. Portable module and its modified version were used for the heat treatment of welded joints. The equipment provides heating of the welded joints of P65 type rails to the normalizing temperature of 900 °C within 160…180 s. The features of the metal microstructure along the width of the heat-affected area at depths of 5…25 mm from the rail running surface, the size of the metal grains, HRC hardness and its deviation from the base metal after the rail welding and after the heat treatment of the welded joints under different cooling conditions the running surface were determined.
Article Details
Issue
Section

This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
References
[1] Kuchuk-Yatsenko, S.I. (1992) Continuousflash-buttwelding. Кiev, Naukova Dumka.
[2] Кuchuk-YatsenkoS. I., DidkovskyA. V., ShvetsV. I. etal. (2016) Flash-butt welding of high-strength rails of nowadays production, The Paton Welding J., 5-6, 7-16. https://doi.org/10.15407/tpwj2016.06.01
[3] Kuchuk-Yatsenko, S.I., Antipin, E.V., Didkovskyi, O.V. etal. (2020) Evaluation of quality of welded joints of high-strength railway rails of modern production taking into account the requirements of ukrainian and european standards. Ibid, 7, 3–11. DOI: https://doi.org/10.37434/tpwj2020.07.
[4] Saita K., Karimine K., Ueda M. et al. (2013) Trends in Rail Welding Technologies and Our Future Approach. Nippon steel &sumitomo metal technical report. December, 2013, 105, 84–92.
[5] Genkin I.Z. (2003) Heat treatment of weided joints in rail using induction units.The Paton Welding J., 9, 38-41.
[6] Panteleimonov, Ye. O. (2017). Complex for heat treatment of welded joints of railway rails under track conditions. Ukraine, Utility Model Patent No. 114593, IPC E01B 31/18, March 10, 2017.
[7] Krivtsun, I. V., Panteleimonov, Ye. O., & Abdullakh, V. M. (n.d.). Equipment for heat treatment of welded rail joints. Ukraine, Utility Model Patent No. 163047, IPC E01B 31/18 (2006.01), C21D 1/10 (2006.01).
[8] Pysmennyi, A. S., Panteleimonov, E. A., Prokofiev, A. S., & Pulka, Ya. V. (2000). Design of an inductor with a magnetic core for heating flat surfaces. Automatic Welding, 11, 39–43
[9] PanteleymonovЕ.А. (2018) To the issue of heat treatment of welded butts of rails. The Paton Welding J., 3, 36-40. https://doi.org/10.15407/tpwj2018.03.08
[10] Prokofiev O.S., Gubatyuk R.S., O.S. Pismennyi O.S.etal. (2020) Development of inductors for bulk and surface heat treatment of welded butt joints of railway rails. The Paton Welding J., 5, 41-48. https://doi.org/10.37434/tpwj2020.05.07
[11] Panteleimonov E.O. (2022) Inductors for heat treatment of welded butt joints of railway and tram grooved rails. ThePatonWeldingJ., 3, 41-44. https://doi.org/10.37434/tpwj2022.03.06
[12] Pantelejmonov E. A., Gubatuk R. S. (2016) Induction device for heat treatment to frail way rails welded butts.The Paton Welding J., 10, 41-44. https://doi.org/10.15407/tpwj2016.10.08
[13] Skoblo, T.S., Sapozhkov, V.E., Aleksandrova, N.M. etal. (2014) Quality of thermally-hardened rails and rail bases.Investigations. Theory. Equipment. Technology. Operation. Ed. by T.S. Skoblo. Kharkov, LLC ShchedraSadyba Plus .
[14] Panteieymonov Y., Kuzmenko G., Prokofiev O. et al. (2025) Features of treatment of welded joints of railway rails/ Scientific Jornal of TNTU (Tern.), vol 120, no 4, pp. 58-69.
[15] KrivtsunІ., HubatyukR., Prokofiev O. et al. (2026) Physical modeling of structure formation of the weld metal during heat treatment of tram track joints, The Paton Welding J., 8, 23-33.