Systems for automatic control of the characteristics of compounds based on composite materials
Article Sidebar
Main Article Content
Abstract
The paper deals with the study and analysis of the antenna array shell formed by the method of electric arc spraying and coating with a composite material. An assessment of the stiffness and strength properties of antennas made in both solid and reinforced structures is presented graphically. The calculation of their stress-strain state under the influence of wind load and gravity is carried out. The inhomogeneities in the composite materials of the shell structures were determined using the conductometric method, and calculations were performed, including the calculation of the resistivity of the composite material and visualization of the results
Article Details
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
1. Sytar V. I., Burmistr M. V., Kabat O. S. (2012). Industrial ecology in the production and processing of polymeric materials. Dnipro: SHEI USUCT, p. 117.
2. Edited by G. S. Katz and D. V. Milevsky (1981). Fillers for polymer composite materials (reference manual).Moscow: Khimiya.
3. Radovenchyk V. M., Gomel M. D. (2010). Solid waste: collection, processing, storage: a textbook. K.: Kondor Publishing House, 552 p.
4. Piringer Otto G., Baner Albert Lawrence (2008). Plastic packaging: interactions with food and pharmaceuticals (2nd ed.). Wiley-VCH, p. 632. ISBN 978-3-527-31455-3.
5. Nikolayenko B. A., Peleshok S. B. (2022). Modern satellite communication systems: a textbook. K.: ICZZI of Igor Sikorsky Kyiv Polytechnic Institute, p. 146.
6. Sribna I. M., S. I. Makhonin, Blasenko G. M., Kirpach L. A. (2019). Cyclic communication and navigation systems. Study guide. K.: DUT, p. 123.
7. Andreev M. V., Drobakhin O. O., Magro V. I., Morozov V. M., Saltykov D. Y. ANTENNAS OF ELECTRONIC VLF.
8. Antennas and microwave devices: Study guide for course design. 4 parts - Kh.
9. Markovich S. I. (2007) Study of the relationship between wear resistance and physical and mechanical properties of coatings applied by electric arc spraying of dissimilar wires. Problems of friction and wear, no. 46, pp. 16–18.
10. Yavorska M. I., Dubyniak T. S., Manziy O. S., Andreichuk S. K. (2022). Doslidzhennia protsesu ta zadachi, shcho vynykaiut pry utvorenni obolonok metodom elektroduhovoho napylennia [Study of the process and problems arising during the formation of shells by the method of electric arc spraying]. MMMTES (Tern., November 22–23, 2022), pp. 85–87. (In Ukrainian).
11. Dubynyak T., Dzhydzhora R., Manziy O., Andreichuk S. The process of shells formation by electric arc spraying method and optimization by the criterion of their geometric shape accuracy. Scientific Journal of TNTU, vol. 104, no. 4, pp. 24–32. https://doi.org/10.33108/visnyk_tntu2021.04.024
12. “Antenna and Wave Propagation” by John D. Kraus and Ronald J. Marhefka (2017, McGraw Hill). https://doi.org/10.1093/acprof:oso/9780199641758.003.0003
13. Reddy J. N. (2014). Introduction to the Finite Element Method. McGraw-Hill. https://doi.org/10.1093/acprof:oso/9780199641758.003.0003
14. Zhang X., & Ainsworth M. (2010). The Finite Element Method in Electromagnetics. Wiley.