Criterion assessment of the efficiency of injection equipment during the injection of powdered ferroalloys

Abstract

The purpose of the work is determining the efficiency of injection equipment with the injection of ferroalloys of different fractional composition, density and flow deep into the iron-carbon melt, taking into account the parameters of injection equipment (length and diameter of the pipeline and pressure in the powderfeeder). The analytical review of the literature is performed, which confirmed the advantage of powder injection in a teeming ladle compared to traditional technologies of deoxidation and alloying. Based on known mathematical models adapted to specific technological conditions, mathematical modeling is carried out, which takes into account a number of important parameters for technology, including fractional composition, density and consumption of powder ferroalloy, taking into account the parameters of injection equipment. The optimal diameter of the pipeline is determined. Nomograms of the lowest level of carrier gas consumption are designed. With the help of nomograms, it is possible to control the operation mode of injection equipment in obtaining pulsationless transportation of gas-powder mixture depending on the ferroalloy fraction, its flow rate and density, taking into account the diameter of the pipeline. Based on the results of mathematical modeling, the criterion for assessment the efficiency of injection equipment has been deduced, that makes it possible to determine quickly the pulsationless transport of gas-powder mixture depending on the fraction of powder reagent and pipeline diameter. The consumption of carrier gas depending on the fraction of powder reagent and the diameter of the pipeline, which can be used to control the operation mode of injection equipment in order to obtain pulsationless transport of gas-powder mixture has been determined.