Parameters investigation for independent pendular suspension of sprayer boom https://doi.org/10.33108/visnyk_tntu2019.04.090
Article Sidebar
Main Article Content
Abstract
New construction of the boom suspension designed in the form of four-link «batwing»-type lever is proposed in this paper. Its peculiarity is that it is constructed of two independent double-arm pendulums, oscillations of which are restricted by articulated elastic-damping elements. The kinematic relationship between deformation of elastic suspension element and the sprayer boom motion is determined. The dynamic model describing this oscillation process is developed in order to test the ability of the given independent suspension to damp boom vibrations. The solutions for the partial case of boom oscillations occurence are obtained, due to their analysis the efficiency of the proposed suspension can be estimated.
Article Details
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
1. Babii A., Babii M. Impact of oscillation amplitude of boom sprayers load-bearing frame sections. Scientific Journal of TNTU. 2019. Vol. 95. No. 3. P. 97–104. https://doi.org/10.33108/visnyk_tntu2019.03.097
2. Agroexpert. URL: https://agroexpert.ua/obpriskuvanna-na-so-slid-zvernuti-osoblivu-uvagu-0/.
3. Babii A. V. Analiz parametriv shtanhovoho obpryskuvacha z metoyu zbil'shennya yoho produktyvnosti. Machinery & Energetics. Journal of Rural Production Research. 2019. Vol. 10. No. 4. Р. 51–55.
4. Rybak T. I., Babii A. V., Bortnyk I. M. еt al. Evaluation of the Service Life of the Frames of Sections of Boom Field Sprayers. Mater Sci 55. 2019. Р. 374–380. https://doi.org/10.1007/s11003-019-00312-0
5. Andreikiv O. E., Lysyk A. R., Shtayura N. S. еt al. Evaluation of the Residual Service Life of Thin-Walled Structural Elements with Short Corrosion-Fatigue Cracks. Mater Sci 53. 2018. Р. 514–521. https://doi.org/10.1007/s11003-018-0104-4
6. Dmytrychenko M. F., Vikovych I. A. Dynamika mobil'nykh mashyn z nachipnymy funktsional'nymy elementamy: Monohrafiya. L'viv: L'vivs'kа politekhnikа. 2008. 496 р.
7. Vikovych I. A., Diveyev B. M., Dorosh I. R. Rozrakhunok ta minimizatsiya kolyvnykh protsesiv u shtanhakh obpryskuvachiv. Avtomatyzatsiya vyrobnychykh protsesiv u mashynobuduvanni ta pryladobuduvanni. 2011. Vyp. 45. Р. 465–471.
8. Vikovych I. A. Konstruktsiyi i dynamika shtanhovykh obpryskuvachiv: monohrafiya. L'viv: “L'vivs'koyi politekhniky”. 2003. 460 р.
9. Pidviska shtanhy obpryskuvacha: deklaratsiynyy patent na korysnu model' 11792 A01M 7/00; zayavleno 13.06.2005 u200505794; opublikovano 16.01.2006, Byul. № 1.
10. Tymoshenko S. P., Yanh D. Kh., Uyver U. Kolebanyya v ynzhenernom dele / рer. s anhl. L. H. Korneychuka; рod red. E. Y. Hryholyuka. M.: Mashynostroenye, 1985. 472 р.