Determination of mechanical properties of alloy steel 30Kh2SN2MFA according to the instrumented indentation results https://doi.org/10.33108/visnyk_tntu2019.02.028
Article Sidebar
Main Article Content
Abstract
The possibility of using the instrumented indentation method in mechanical engineering on the example of steel 30KH2SN2MFA is substantiated. The mechanical properties obtained by the instrumented indentation method are confirmed by the results of uniaxial tension tests. The deviation of the strength properties determined using the instrumented indentation method from the results of tensile tests does not exceed 5%.
Article Details
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
1. DSTU EN 10002-1:2006. Metalevi materialy. Vyprobuvannya na roztyah. Chastyna 1. Metod vyprobovuvannya za kimnatnoyi temperatury. (EN 10002-1:2004, IDT). [Chynnyy z 01.07.2008].
2. GOST 7564-97. Prokat. Obshhie pravila otbora prob, zagotovok i obrazcov dlya mexanicheskix i texnologicheskix ispytanij. [Vved. 01.01.1999].
3. DSTU ISO 6506-1:2007. Materialy metalevi. Vyznachennia tverdosti za Brinellem. Chastyna 1. Metod vyprobuvannia. [Chynnyi z 01.01.2009]
4. Metallic materials – Instrumented indentation test for hardness and materials parameters. ISO 14577-1:2002 – ISO 14577-3:2002.
5. Katok O. A., Kravchuk R. V., Kharchenko V. V., Rudnytskyi M P. Ustanovka dlia kompleksnoho doslidzhennia mekhanichnykh kharakterystyk konstruktsiinykh materialiv obladnannia AES. Problemy mitsnosti. 2019. № 2. Р. 171–181.
6. SOU-56-28-2018. Materialy metalevi. Vyznachennia kharakterystyk mekhanichnykh vlastyvostei konstruktsiinykh materialiv za pokaznykamy tverdosti za Brinellem ta metodom instrumentovanoho indentuvannia. Metod vyprobuvannia. Instytut problem mitsnosti imeni H. S. Pysarenka NAN Ukrainy. Kyiv, 2018.
7. Haggag F. M. Innovative SSM Technology Determines Structural Integrity of Metallic Structures: Example Applications for Pressure Vessels and Oil and Gas Pipelines. International Journal of Pure and Applied Physics. 2007. № 1. P. 91–108.
8. DSTU 7793:2015 Materialy metalevi. Vyznachennia rivnia rozsiianykh poshkodzhen metodom LM-tverdosti. [Chynnyi z 01.04.2016].
9. Shvets V. P., Muzyka M. R., Makovetskyi I. V., Bulakh P. O. Kontrol potochnoho stanu metalu strilkovoho perevodu v protsesi napratsiuvannia. Problemy mitsnosti. 2011. № 1. Р. 104–108.
10. Katok O. A. K opredeleniyu mexanicheskix xarakteristik stalej po rezul'tatam ispytanij na tverdost'. Problemi mіcnostі. 2014. № 6. Р. 66–70.
11. GOST 9450-76. Izmerenie mikrotverdosti vdavlivaniem almaznyx nakonechnikov. [Vved. 01.01.1977].