Increase the productivity of hard-alloy tools for heavy machine tools by processing impulse magnetic field https://doi.org/10.33108/visnyk_tntu2018.04.052
Article Sidebar
Main Article Content
Abstract
The work is devoted to the creation and implementation of a cutting tool made of carbide material with increased operational properties. The reinforced tool is reliable and durable. Increasing the efficiency of the cutting tool for cutting carbides for heavy machine tools is performed by processing pulsed magnetic field. It has been established that processing by a pulsed magnetic field contributes to the durability and durability of tool material during roughing cutting.
Article Details
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
1. Kovalev V., Vasilchenko Y. Statistical researches of work of the enterprises of heavy mechanical engineering for a substation of technical characteristics of new machine tools. 11th International Conference RaDMI 2011 from 15 − 18 September 2011, Sokobanja (Serbia), 2011, pp. 359 − 364.
2. Kovalev V.D., Vasilchenko Ya.V., Klimenko G.P. Primenenie obrabotki impulsnyim magnitnyim polem dlya uprochneniya detaley mashin i rezhuschego instrumenta. Vestnik dvigatelestroeniya, 2004, Vol. 4. pp. 149 − 151. [In Russian].
3. Postnikov S.N., Sidorov V.L., Ilyahinskiy A.B. Perestroyka defektnyih kompleksov v kristallicheskih tverdyih telah pod deystviem magnitnyih poley doporogovyih energy. Prikladnyie problemyi prochnosti i plastichnosti. Vsesoyuznyiy mezhvuzovskiy sbornik, Gorkiy, 1980, pp.138 − 143. [In Russian].
4. Soroka O.B., Rodichev Yu.M., Koval'ov V.D., Vasyl'chenko Ya.V. Prohnozuvannya vtomnoyi mitsnosti tverdykh splaviv, obroblenykh impul'snym mahnitnym polem. Nadiynist' instrumentu ta optymizatsiya tekhnolohichnykh system: zb. nauk. prats', Kramators'k: DDMA, 2013. Vol. 32, pp. 317 − 324. [In Ukrainian].
5. Soroka O.B., Rodichev Yu.M., Koval'ov V.D. ta in. Zmitsnennya tverdosplavnoho rizal'noho instrumentu dlya vazhkoho mashynobuduvannya na osnovi poverkhnevoyi ta ob"yemnoyi modyfikatsiyi fizychnymy metodamy. Visnyk Ternopil's'koho Natsional'noho tekhnichnoho universytetu im. I. Pulyuya, 2013, Vol. 3 (71), pp. 133 − 145. [In Ukrainian].
6. Rodichev Yu.M., Soroka O.B., Koval'ov V.D., Vasyl'chenko Ya.V., Shapovalov M.V. Pryskoreni vyprobuvannya rizal'nykh plastyn pry intensyvnomu kontaktnomu navantazhenni. Visnyk Donbas'koyi derzhavnoyi mashynobudivnoyi akademiyi, Kramators'k, 2018, Vol. 1 (43), pp. 181 − 187. [In Ukrainian].