Experimental researches of parameters technological process of the improved beets tops purifier https://doi.org/10.33108/visnyk_tntu2018.04.060
Article Sidebar
Main Article Content
Abstract
In this article, the problem of the need to improve existing and development of essentially new beet-harvesting machines is investigated since the existing ones do not fully satisfy the agronomic requirements for the process of harvesting roots. The results of experimental studies of the improved beet-harvesting machine are presented. The technological efficiency of application of the improved design of the cutter of the remnants of
the wedge was determined by conducting field comparative studies of the two types of denominators, which distinguished themselves from the constructive execution of the comb copier and knife. The surface of the reviews and their two-dimensional sections of the damage to the root crops and the number of cut root crops from the soil were constructed, depending on the speed of the root-crop modulus and the height of the root crops.
Article Details
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
1. Anna Tson, Substantiation of capacity of screw conveyer of haulm-cutting module, Anna Tson, Tymofii Rybak, Mykola Stashkiv, Taras Shchur Ternopil Ivan Pul'uj National Technical University, MOTROL. Commission of Motorization and Energetics in Agriculture. 2018. Vol. 20. No. 1. 83 − 89.
2. Rybak T., Tson A., Stashkiv M., Tson O. Analytical and applied model of the process of the cut vegetable components feeding to the screw conveyor of the top gathering module. Scientific Journal of TNTU (Tern.), 2018 vol. 90, no 2, pp. 105 − 114. https://doi.org/10.33108/visnyk_tntu2018.02.105
3. Oleg Lyashuk. Torsional oscillations of an auger multifunctional conveyor’s screw working body with consideration of the dynamics of a processed medium continuous flow / Oleg Lyashuk, Maria Sokil, Yuriy Vovk, Anna Tson, Andrii Gupka, Oleksandr Marunych // Ukrainian Food Journal. 2018. Volume 7. Issue 3. Pp. 499 − 510. https://doi.org/10.24263/2304-974X-2018-7-3-14
4. Anna Tson. Feasibility study of an auger conveyor performance of the haulm removing module / Anna Tson, Nadia Khomuk, Taras Dovbush, Oleh Tson // Scientific Journal of TNTU. Tern.: TNTU, 2018. Vol 91. No 3. Pp. 101 – 106. https://doi.org/10.33108/visnyk_tntu2018.03.101
5. Tson H.B. Prohrama doslidzhennia robochykh orhaniv hychkozbyralnoho modulia / Zbirnyk tez dopovidei VII Mizhnarodnoi naukovo-tekhnichnoi konferentsii molodykh uchenykh ta studentiv «Aktualni zadachi suchasnykh tekhnolohii» – Ternopil, TNTU im. I. Puliuia, 2018. – p. 215. [In Ukrainian].
6. Zavalyshyn F.S., Mantsev N.H. Metodu yssledovanyi po mekhanyzatsyy selskokhoziaistvennoho proyzvodstva. M.: Kolos, 1982. 228 p. [In Russian].
7. Shenk Kh. Teoryia ynzhenernoho eksperymenta. M.:Myr, 1972. 374 p. [In Russian].