Modeling the Spatial Dynamics of a Tower Crane Transporting a Distributed-Mass Load
Main Article Content
Abstract
A tower crane carrying a rigid beam attached at one end through an ideal spherical joint is considered. The objective is to formulate reproducible equations for free payload orientation and quantify sensitivity to mass, rope length and inertia. The model has seven physical degrees of freedom and accounts for jib rotation, trolley motion and prescribed rope shortening. A unit quaternion represents beam orientation, while stereographic coordinates describe the rope direction. Three principal moments of inertia and drive resistance are included; joint friction, aerodynamic drag and structural flexibility are neglected. Compact mass-matrix equations are integrated over 30 s and checked using energy, force and moment balances, tolerance refinement and an independent Euler-angle derivation on a nonsingular interval. In the illustrative baseline scenario, the maximum beam inclination is 0.56422 rad and rope tension ranges from 24.02 to 29.70 kN. Six one-factor calculations with changes of ±20% quantify the effects of payload mass, initial rope length and principal inertias. The contribution is a reproducible and numerically verified formulation for the stated attachment geometry, rather than a claim of the first seven-degree-of-freedom crane model. The results support further parameter identification and control studies but do not establish resonance, instability or certified crane operating limits. Experimental validation remains necessary.
Article Details
Issue
Section

This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
References
[1] M.R. Mojallizadeh, B. Brogliato, C. Prieur, Modeling and control of overhead cranes: A tutorial overview and perspectives, Annual Reviews in Control 56 (2023) 100877. https://doi.org/10.1016/j.arcontrol.2023.03.002
[2] M. Stölzner, M. Kleeberger, W.A. Günthner, J. Fottner, Calculating the dynamic behaviour of lattice boom mobile cranes during hoisting, FME Transactions 48 (2020) 313-318. https://doi.org/10.5937/fme2002313s
[3] L. Solazzi, N. Zrnić, Dynamic analyses of gantry crane under several trolley and payload movements, FME Transactions 48 (2020) 281-286. https://doi.org/10.5937/fme2002281s
[4] C. Aguiar, D. Leite, D. Pereira, G. Andonovski, I. Škrjanc, Nonlinear modeling and robust LMI fuzzy control of overhead crane systems, Journal of the Franklin Institute 358 (2021) 1376-1402. https://doi.org/10.1016/j.jfranklin.2020.12.003
[5] T.K. Nguyen, Combination of feedback control and spring-damper to reduce the vibration of crane payload, Archive of Mechanical Engineering 68 (2) (2021) 165-181. https://doi.org/10.24425/ame.2021.137046
[6] L. Chai, Q. Guo, H. Liu, M. Ding, Linear Active Disturbance Rejection Control for Double-Pendulum Overhead Cranes, IEEE Access 9 (2021) 52225-52237. https://doi.org/10.1109/access.2021.3070048
[7] M. Ambrosino, M. Berneman, G. Carbone, R. Crépin, A. Dawans, E. Garone, Modeling and Control of 5-DoF Boom Crane, Proceedings of the 37th ISARC, Kitakyushu, Japan (2020) 514–521. https://doi.org/10.22260/isarc2020/0071
[8] A.M. Abdullahi, Z. Mohamed, H. Selamat, H.R. Pota, M.S. Zainal Abidin, S.M. Fasih, Efficient control of a 3D overhead crane with simultaneous payload hoisting and wind disturbance: design, simulation and experiment, Mechanical Systems and Signal Processing 145 (2020) 106893. https://doi.org/10.1016/j.ymssp.2020.106893
[9] Y. Cao, T. Li, Review of Antiswing Control of Shipboard Cranes, IEEE/CAA Journal of Automatica Sinica 7 (2) (2020) 346–354. https://doi.org/10.1109/JAS.2020.1003024
[10] G. Litak, J. Margielewicz, D. Gąska, D. Yurchenko, K. Dąbek, Dynamic response of the spherical pendulum subjected to horizontal Lissajous excitation, Nonlinear Dynamics 102 (2020) 2125–2142. https://doi.org/10.1007/s11071-020-06023-5
[11] J. Ye, J. Huang, Analytical analysis and oscillation control of payload twisting dynamics in a tower crane carrying a slender payload, Mechanical Systems and Signal Processing 158 (2021) 107763. https://doi.org/10.1016/j.ymssp.2021.107763
[12] Q. Wu, X. Wang, L. Hua, M. Xia, Modeling and nonlinear sliding mode controls of double pendulum cranes considering distributed mass beams, varying roped length and external disturbances, Mechanical Systems and Signal Processing 158 (2021) 107756. https://doi.org/10.1016/j.ymssp.2021.107756
[13] M.M. Bello, Z. Mohamed, M.Ö. Efe, H. Ishak, Modelling and dynamic characterisation of a double-pendulum overhead crane carrying a distributed-mass payload, Simulation Modelling Practice and Theory 134 (2024) 102953. https://doi.org/10.1016/j.simpat.2024.102953
[14] Z. Wang, L. Yang, H. Ouyang, L. Yu, Global robust control of overhead cranes with distributed mass beams considering model uncertainty and external disturbance, Mechanical Systems and Signal Processing 214 (2024) 111378. https://doi.org/10.1016/j.ymssp.2024.111378
[15] C. Hou, C. Liu, Z. Li, D. Zhong, An improved non-singular fast terminal sliding mode control scheme for 5-DOF tower cranes with the unknown payload masses, frictions and wind disturbances, ISA Transactions 149 (2024) 81-93. https://doi.org/10.1016/j.isatra.2024.04.001
[16] Y. Wu, Q. Wu, M. Zhang, S. Guo, M. Zhai, R. Pang, N. Sun, A model predictive control method for 7-DoF tower cranes with distributed mass payloads and variable rope lengths, Mechanical Systems and Signal Processing 229 (2025) 112513. https://doi.org/10.1016/j.ymssp.2025.112513
[17] J. Huang, K. Zhu, Dynamics and control of three-dimensional dual cranes transporting a bulky payload, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235 (2021) 1956-1965. https://doi.org/10.1177/0954406220949579
[18] X. Yao, Y. Feng, L. Meng, L. Yao, H. Li, Influence of structural elasticity on transshipment dynamics of dual-trolley overhead crane, Advances in Mechanical Engineering 13 (7) (2021) 1–21. https://doi.org/10.1177/16878140211031029
[19] A. Stadnik, S. Podlesny, S. Kaporovych, O. Kabatskyi, Spatial transportation of the beam on a bifilar fastening, FME Transactions 50 (2022) 548-560. https://doi.org/10.5937/fme2203548s
[20] S. Podliesnyi, Investigation of the spatial motion of a body with distributed mass connected by an inextensible cable to a moving trolley, Scientific Journal of the Ternopil National Technical University 106 (2) (2022) 83–91. https://doi.org/10.33108/visnyk_tntu2022.02.083