Hydrogen wear resistance under the metal-polymer friction pairs operation https://doi.org/10.33108/visnyk_tntu2018.03.088

##plugins.themes.bootstrap3.article.sidebar##

Vol. 91 No. 3 (2018)
Download article PDF (Англійська)
Опубліковано: 2018-11-12
DOI: https://doi.org/10.33108/visnyk_tntu2018.03.088
Ключові слова:
carbon fiber, copper carbon fiber, phenylon C-2, wear resistance, hydrogen deterioration, flooding of metal surface

##plugins.themes.bootstrap3.article.main##

Olexandr Burya
Dniprovsk State Technical University, Kamianske, Ukraine
Valentina Dubkova
Dniprovsk State Technical University, Kamianske, Ukraine
Igor Pachkovski
Dniprovsk State Technical University, Kamianske, Ukraine
Timothy Rybak
Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine
Iryna Rula
Dnipro State Agrarian and Economic University, Dnipro, Ukraine

Анотація

The results of studies of labyrinth seals made of composite materials on the basis of aromatic polyamide phenylon reinforced by copper-carbon fiber are presented. It is shown that in this case a selective transfer with friction is realized, the possibility of displacing the surface of the metal decreases, the wear resistance of the support joints and the ability to seal up are increased.

##plugins.themes.bootstrap3.article.details##

Номер

Том 91 № 3 (2018)

Розділ

Articles
Creative Commons License

Ця робота ліцензується відповідно до ліцензії Creative Commons Attribution 4.0 International License.

Посилання

1. Garkunov D.N. Tribotexnika. Moscow, Mashinostroenie, 1985, 424 p. [In Russian].

2. Varshavskij I.L., Garkunov D.N., Polyakov A.A. Samoorganizaciya iznashivaniya na osnove lokalizacii vodoroda v poverhnostnom sloe pri trenii. V kn. Dolgovechnost' trushchihsya detalej mashin. Moscow, Mashinostroenie, 1986, No. 1, pp. 116 – 124 [In Russian].

3. Prokopenko A.K., Francev V.N., Yudin V.M. Povyshenie iznosostojkosti uzlov treniya mashin bytovogo naznacheniya na osnove izbiratel'nogo perenosa. Obzornaya informaciya. Moscow, CBNTI Minbyta RSFSR, 1987, 18 p. [In Russian].

4. Yudin V.M., Stavrovskij M.E., Pashkovskij I.E., Ivanova R.V. Razrabotka metodiki i priborov dlya izucheniya mekhanizma vodorodnogo iznashivaniya. V kn. Raschety konstrukcij i ehffektivnost' tekhnologicheskogo oborudovaniya predpriyatij bytovogo obsluzhivaniya naseleniya. Moscow, Minbyt RSFSR, 1987 [In Russian].

5. Burya A.I., Chukalovskij P.A., Rula I.V., Safonova A.M. Razrabotka i issledovanie svojstv termostojkih ugleplastikov na osnove fenilona i nikel'soderzhashchih uglerodnyh volokon. Materialy IX Rossijsko-Kitajskogo Simpoziuma “Novye materialy i tekhnologii”, (Astrahan', Rossiya,19 – 22 sentyabrya 2007) Interkontakt Nauka, Moskva, T. 1, 2007, pp. 243 – 247 [In Russian].

6. Burya O.I., Rula I.V. Otsinka rivnomirnosti zmishuvannya komponentiv v obertal'nomu elektro-mahnitnomu poli. 12 ezhehodnaya mezhdunarodnaya promyshlennaya konferentsyya y blyts vystavka “Éffek-tyvnost' realyzatsyy nauchnoho, resursnoho y promyshlennoho potentsyala v sovremennykh uslovyyakh” (13 – 17 fevralya 2012 h. p. Plav'e, Karpaty) [In Ukrainian].