Strategies for thermal management and advanced computational modeling of cooling systems
##plugins.themes.bootstrap3.article.main##
Анотація
The paper reviews internal turbine-cooling methods and presents an original stationary conjugate heat-transfer comparison of smooth, V-ribbed, pin-fin and dimpled passages. The rectangular surrogate matches a CAD concept inlet area of 119 mm² and perimeter of 62 mm; its length and feature arrangements are prescribed. Calculations use ANSYS Fluent Student 2026 R1, the SST k–omega model, ideal-gas air and a conducting reference-metal wall. The coolant inlet total temperature is 800 K, the outlet absolute static pressure is 2 MPa and the external convection condition represents gas at 1800 K with a coefficient of 1500 W/(m² K). Reference Reynolds numbers of 100 000, 200 000 and 400 000 are compared at equal coolant mass flow. The study reports heat loads, effective heat-transfer metrics and numerical conservation, iteration and three-level mesh checks. The results quantify the thermal and hydraulic consequences of selected designs. Wall modeling, constant metal properties, omitted rotation and the absence of experimental validation restrict their application to numerical screening. A conventional cube-root thermal-hydraulic performance index is calculated using the projected heated area and, separately, the actual interface area; it is a screening metric rather than an exact equal-pumping-power result. Marked flow-rate cases that fail the adopted stability criteria are retained as qualified computed estimates; the quantitative conclusions focus on Reref = 200 000 and its mesh sensitivity.
##plugins.themes.bootstrap3.article.details##
Номер
Розділ

Ця робота ліцензується відповідно до ліцензії Creative Commons Attribution 4.0 International License.
Як цитувати
Посилання
[1] Taspia Shawkat Chowdhury, Fatima Tasneem Mohsin, Morium Mannan Tonni, Mita Noor Hasan Mita, M. Monjurul Ehsan (2023). A critical review on gas turbine cooling performance and failure analysis of turbine blades. International Journal of Thermofluids. 18, 100329. 1-20
https://www.sciencedirect.com/science/article/pii/S2666202723000484
[2] Prof. Amol Kumar Tripathi, Neha Verma (2020). A Review Paper on Gas Turbine Blade Cooling Methods. International Journal of Trend in Scientific Research and Development. Volume 5 Issue 1. 597-602
https://scispace.com/pdf/a-review-paper-on-gas-turbine-blade-cooling-methods-23a0ajdl83.pdf
[3] Krzysztof Marzec (2021). Low-Pressure Turbine Cooling Systems. Encyclopedia. 1(3), 893-904
https://doi.org/10.3390/encyclopedia1030068
[4] Kevin Leamy and Jim Griffiths (2001). Design, Fabrication, and Testing of an Auxiliary Cooling System for Jet Engines. NASA Technical Report (NASA/CR—2001-210353). 190 pages.
https://ntrs.nasa.gov/api/citations/20010047293/downloads/20010047293.pdf
[5] Lobunko O. Search for state parameters of thermodynamic models of gas turbine systems with different thrust amounts. SWorldJournal. 2024;1(23-01):15–22. https://doi.org/10.30888/2663-5712.2024-23-00-009
[6] Khodadadi A. (2024). Modelling a cooling technique for a turbine blade in jet engines. Aerospace engineering degree report. University of Manchester. Supervisor: H. Iacovides.
[7] Weiwei Che, Shuiting Ding, Chuankai Liu (2014). A modeling method on aircraft engine based on the Component Method of secondary air system. 3rd International Symposium on Aircraft Airworthiness, ISAA. Procedia Engineering. 80, 258-271
[8] Huazhao Dong & Wenlei Lian (2024). A Novel Approach for Aircraft Engine Modeling Considering the Energy Accumulation Effect Based on a Variable Mass System Thermodynamics Method. Energies, 17(24), 6424
https://www.mdpi.com/1996-1073/17/24/6424
[9] Olexandr Iskra; Elina Plisetska; Olexandr Lobunko (2025). Justification of the choice of components of the aerospace vehicle protection system. Scientific Journal of the Ternopil National Technical University, № 1 (117) 42-53
[10] Chao Zhang, Matthew Janeway (2022). Optimization of Turbine Blade Aerodynamic Designs Using CFD and Neural Network Models. Int. J. Turbomach. Propuls. Power, 7(3), 20
https://www.mdpi.com/2504-186X/7/3/20
[11] Je-Chin Han, Lesley M. Wright (2005). Enhanced Internal Cooling of Turbine Blades and Vanes. Turbine Heat Transfer Laboratory Department of Mechanical Engineering Texas A&M University College Station, Texas 77843-3123
https://netl.doe.gov/sites/default/files/gas-turbine-handbook/4-2-2-2.pdf
[12] Pandya N., Ekkad S. V. (2025). Experimental study of rib height and pitch effects on thermal-hydraulic performance in gas turbine cooling at high Reynolds numbers. International Communications in Heat and Mass Transfer, 169, Part D, 109875.
https://doi.org/10.1016/j.icheatmasstransfer.2025.109875
[13] Luo L., Wang C., Wang L., Sundén B., Wang S. (2016). Heat transfer and friction factor in a dimple-pin fin wedge duct with various dimple depth and converging angle. International Journal of Numerical Methods for Heat & Fluid Flow, 26(6), 1954–1974. https://doi.org/10.1108/HFF-02-2015-0043
[14] Wadhah Hussein al Doori (2022). The effects of nusselt, reynolds number, and pressuredrop on the thermal performance of pierced pin fins. Frontiers in Heat and Mass Transfer, 19, 8
[15] Karthik Krishnaswamy, Suresh Sivan (2021). Improvement in thermal hydraulic performance by using continuous V and W-Shaped rib turbulators in gas turbine blade cooling application. Case Studies in Thermal Engineering, 100857
https://www.sciencedirect.com/science/article/pii/S2214157X21000204
[16] Prabhakar Bhandari, Kamal S. Rawat, Yogesh K. Prajapati, Diwakar Padalia,
Lalit Ranakoti, Tej Singh (2023). Design modifications in micro pin fin configuration of microchannel heat sink for single phase liquid flow: A review. Journal of Energy Storage, 107548
https://www.sciencedirect.com/science/article/pii/S2352152X23009453
[17] S. V. Epifanov, E. V. Martsenyuk, I. F. Kravchenko (2022). Design of cooled parts of gas turbine engines. National Aerospace University named after M. Ye. Zhukovsky “Kharkiv Aviation Institute”, 88
https://dspace.library.khai.edu/xmlui/handle/123456789/7747
[18] Ti-5Al-2.5Sn Powder: The Ultimate Guide for (2025). Metal Powders for 3D Printing and Additive Manufacturing.
https://met3dp.com/ti-5al-2-5sn-powder/
[19] Menter F. R. (1994). Two-equation eddy-viscosity turbulence models for engineering applications. AIAA Journal, 32(8), 1598–1605. https://doi.org/10.2514/3.12149
[20] Geuzaine C., Remacle J.-F. (2009). Gmsh: A 3-D finite element mesh generator with built-in pre- and post-processing facilities. International Journal for Numerical Methods in Engineering, 79, 1309–1331. https://doi.org/10.1002/nme.2579
[21] ANSYS. Fluent Theory Guide. y+-Insensitive Near-Wall Treatment for omega-based Turbulence Models. https://ansyshelp.ansys.com/public/Views/Secured/corp/v251/en/flu_th/section_kbf_dl4_vvb.html
[22] Bergman T. L., Lavine A. S. (2017). Fundamentals of Heat and Mass Transfer. 8th ed. Hoboken, NJ: John Wiley & Sons.
https://bcs.wiley.com/he-bcs/Books?action=index&bcsId=10626&itemId=1119320429
[23] Yanqi Chen,Chuang Wen, Ji Zhang and Hideyuki Sakai (2025). Experimental Investigation of Heat Transfer Coefficients in a Plate Heat Exchange for an Organic Rankine Cycle. Energies, 18(24), 6573
https://www.mdpi.com/1996-1073/18/24/6573
[24] Xu J., Zhang K., Duan J., Lei J., Wu J. (2021). Systematic Comparison on Convective Heat Transfer Characteristics of Several Pin Fins for Turbine Cooling. Crystals, 11(8), 977. https://doi.org/10.3390/cryst11080977
[25] Celik I. B., Ghia U., Roache P. J., Freitas C. J., Coleman H., Raad P. E. (2008). Procedure for estimation and reporting of uncertainty due to discretization in CFD applications. Journal of Fluids Engineering, 130(7), 078001. https://doi.org/10.1115/1.2960953